OPTO 22 – SNAP-AOV-5 _ SNAP 1-Ch 0-10VDC Analog Voltage Output Module
OPTO 22 – SNAP-AOV-5 _ SNAP 1-Ch 0-10VDC Analog Voltage Output Module
Quick Specs:
- SNAP 1-Ch 0-10VDC Analog Voltage Output Module
The SNAP-AOV-5 provides a single channel of digital-to-analog conversion. The module has a true differential (floating) output that eliminates ground loops and has a nominal output range of 0-10 VDC. The module is transformer isolated and optically isolated from other modules and devices, and is factory calibrated.
Part of the SNAP PAC System, the module mounts on a SNAP PAC rack with a SNAP PAC brain or rack-mounted controller. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for an Allen-Bradley Logix PLC system, such as ControlLogix, MicroLogix, or CompactLogix.
For a similar two-channel module, see SNAP-AOV-25.
Specifications:
|
Input |
12-bit serial data |
|
Output |
0 to +10 Volts DC (floating) |
|
Span |
10 Volt span |
|
Resolution |
2.44 mV |
|
Response Time |
99.9%/19.98 V/3 mS |
|
DC Common Mode Rejection |
>-120 dB |
|
AC Common Mode Rejection |
>-120 dB @ 60 Hz |
|
Maximum Operating Common Mode Voltage |
250 V |
|
Common Mode Resistance |
>1000 Megohms |
|
Load Current |
10 mA (floating) |
|
Short Circuit Current Continuous |
125 mA (typical) |
|
Accuracy |
0.1% of span |
|
Gain Temperature Coefficient |
50 PPM/°C |
|
Offset Temperature Coefficient |
20 PPM/°C |
|
Power Requirements |
5 Volts DC @ 150 mA |
|
Ambient Temperature: |
-20 °C to 70 °C |
|
Humidity |
5-95%, non-condensing |
|
Torque, hold-down screws |
4 in-lb (0.45 N-m) |
|
Torque, connector screws |
5.26 in-lb (0.6 N-m) |
|
Wire size range |
22 to 14 AWG |
|
Agency Approvals |
UL, CE, RoHS, DFARS; UKCA |
|
Warranty |
Lifetime |
