OPTO 22 – AD11 _ G1 -5 to +5 VDC Analog Input
Quick Specs:
- G1 -5 to +5 VDC Analog Input
G1 I/O family
The AD11 analog input module provides a single channel of optically isolated voltage-to-digital conversion. Nominal voltage input is -5 to + 5 VDC.
This module mounts on a G1 analog mounting rack, for example the PB16AH.
Specifications:
|
|
AD11 |
AD12 |
AD12T |
AD13T |
|
Nominal Voltage Input |
-5 to + 5 VDC |
-10 to 10 VDC |
-10 to 10 VDC |
0 to 100 mV DC |
|
Over/Under Range Capability |
-5.25 to 11 VDC |
-10.5 to 11 VDC |
-10.5 to 11 VDC |
-0.250 to 220 mV DC |
|
Accuracy* |
± 10 mV |
± 20 mV |
± 20 mV |
± 100 µV |
|
Power Requirements |
15 mA at +15 (+/- 0.25) VDC |
15 mA at +15 (+/- 0.25) VDC |
35 mA at +15 (+/- 0.25) VDC |
35 mA at +15 (+/- 0.25) VDC |
|
*May be improved by the use of the “Set Offset” or “Set Gain” commands in the OPTOMUX command set. |
|
Input Response Time* |
5% of scale change in 8.5 ms 63% of scale change in 165 ms |
|
Resolution |
12-bits |
|
Isolation |
4,000 VRMS |
|
Temperature |
0 to 70 °C |
|
*AD6HS input response 100% step change in less than 3 milliseconds. |
