![[95263] Mini 4WD PRO MS Chassis Evo.I ~ Limited Edition Version (MS Chassis)](https://www.pipefixparts.com/wp-content/uploads/2026/10/95263-mini-4wd-pro-ms-chassis-evo-i-limited-edition-version-ms-chassis.webp)
| The Chassis With Loads of Potential This is an MS chassis kit which considerably raises the potential for expert Mini 4WD drivers. Combined with the reinforced N-02/T-01 units and the glass fiber reinforced ABS resin lightweight center chassis are narrow large diameter, lightweight carbon fiber nylon resin wheels with white hard barrel tires. Furthermore, with the added thickness to the new FRP plates and the long nuts, and including numerous grade-up parts like the metal weight “Mass Damper”, the MS chassis really is loaded with potential. |
2 mm FRP Front and Rear Plates The thickness of these plates is now 2.0 mm, 0.5 mm thicker compared to previous ones. Through them flexural rigidity improves also assists in controlling plate bending. |
3 mm FRP Wide Plate Equipped are two sets of front and rear wide plates. A maximum width of 104 mm can be made with 9, 13, 17, 19 mm rollers. |
Silver Reinforced Chassis The N-02/T-01 units and the lightweight center chassis are made from a glass fiber reinforced ABS resin. The whole chassis is colored silver. |
Metal Weight (Mass Damper) There are two metal weights (mass damper) loaded at the front offering more stability during lane changing and over race course slope sections. |
10 mm Nuts These excellent long nuts are strong and superior in maintainability. Performance is not hindered with the high positioning of the rollers. Also loaded at the rear is a metal weight. |
Abdundant Grade-Up Parts Equipped on the narrow large diameter lightweight carbon fiber with nylon resin wheels are white hard barreled tires. Fully loaded with other Grade-up parts. |
| Specifications ● Length: 162 mm（Maximum） ● Width: 104 mm |
| Separately Required Items ●Two R6/AA/UM3 batteries ●Double shaft motor ●Body |
